ODM High Quality Truck Brake Pads Factory – [Copy] Factory Hot Sale 5200 Brake Lining Manufacturing Brake Shoes Lining For Truck Part DT5300 – Feiying

Detail

Failure analysis

1. Failure: Continuously stepping on the brakes, the pedal return is raised, and the braking effect is improved.

Reason: The gap between the friction plate and the brake drum is too large.

2. Failure: the brake pedal is stepped to the end, the braking effect is not good; continuous braking, the effect is not improved, and the pedal is gradually raised.

Cause: There is gas in the brake system.

3. Fault: the pedal position is very low; pedal again, the position cannot be raised, and it feels hard.

Cause: The master cylinder is blocked.

4. Fault: the pedal height is normal, not soft or sinking, but the braking effect is not good.

Reason: The gap between the friction plate and the brake drum is too large or there is oil pollution.

Specification

100% Crucial Dimension, Crack Detection

Complete Models for Different Vehicles

Tens of Different formulation to satisfied to different market

Model Table

1. Annual production of 35 million pieces

2. Advanced and perfect material formula and front-end quality inspection big data center

3. Possess ISO14001/IATF16949 quality certificate; OE standard, CCC certified

Classification

Gifts Series

1. Environmentally friendly, non-asbestos and low metal formula

2. High friction coefficient, providing high braking force during use

3. Smooth braking

4. High cost performanceon various roads

High-end series

1. Environmentally friendly, non-asbestos and low metal formula

2. The friction coefficient is high and stable to ensure the safety of braking

3. Low wear rate and long service life

4. The friction surface is brushed with imported zebra-pattern glue, and the brake disc is cleaned during use to provide high initial grinding braking force